How to replace a dishwasher separator how to#

Tighten firmly but do not over-tighten as this can damage your panels.

Return the border of screws to the inner panel, which will secure the outer panel to it.

Return the Screws Through the Inner Door Panel.

Support it with your knees or with the help of a friend.

Now raise the outer door panel back into place as the underside of the open inner door panel.

Lift the Outer Door Panel Into Place and Support.

You will, however, need the help of a support or a friend to hold the outer panel up to the inner panel during this reassembly. Connecting the two panels of your dishwasher door are as simple as it was putting them back together. Once the new door latch is in place and secure, you will be ready to put your dishwasher door back together.

Now connect the new door latch wire harness to the wire clip attached to the outer door panel that you just separated.

Press it into place until the two locking tabs click or press the locking tabs over the door latch.

Take your new door latch assembly and line it up where the old one was just removed.

Press the New Door Latch Into Place, Tabs Will Lock.

The locking tabs should latch on automatically. It will go into the place of the old door latch, exactly as it was before. Make sure you have completely removed the packaging from your new door latch.

Pull the old door latch assembly out of its slot and throw it away.

Release the two locking tabs that hold the door latch assembly in place by pressing on them firmly.

There is another wire harness near the door latch that will need to be disconnected.

The door latch has a wire harness which lets the dishwasher know when the door is closed, as well as locking tabs to hold it in place. Setting the panel on your towel, you will be able to see the interior function of the door latch and reach the assembly. The door latch you are replacing is located in the outer panel which you have just removed.

Set the outer panel on your towel to protect it and the floor.

Disconnect the clip holding the wires that connect the outer-panel controls to the inner panel.

Carefully separate the bottom panel from the top panel if they need to be pulled apart.

This will release the bottom panel (with the control panel) from the top panel.

Remove the border of screws along the inside edge of the dishwasher door.

Remove the Scews on the Inside Door Panel.

Use your legs or a friend to support the underside, which will soon come loose.

Open the Dishwasher Door and Support the Outer Door Panel.

For this repair, you will be working with the outer panel, but to reach the door latch you will need to separate the two panels and disconnect the wiring that connects them. The inner panel forms the front interior surface of the dishwashing chamber and houses the soap dispenser. The outer panel houses the controls and the door latch. Separate the Dishwasher’s Outer & Inner Door PanelsĪ dishwasher door is made up of an inner panel and an outer panel.

This is for your safety and to ensure your dishwasher doesn’t short while you are fixing it. So remember to unplug your dishwasher or through the relevant breaker if the plug is unreachable. You are about to replace an electrical component of your dishwasher by opening up the door and control panel.

The towel is for cushioning, not potential leaks. Then grab your screwdriver, work gloves, and a towel to lay on the floor. Start by identifying the correct replacement part number and ordering a new door latch assembly that will work with your dishwasher.

How to replace a dishwasher separator how to#

Here’s how to do it: Gather Your Supplies Whatever the reason, it is important to replace your dishwasher door latch assembly any time it breaks. Or you may simply have a broken latch that feels loose to the touch and you won’t be comfortable until it’s fixed, even if your dishwasher is behaving normally. Without it, your dishwasher may not close and seal, causing leaks, Or if the latch sensor is broken, your dishwasher may falsely believe it is still open when it is closed and refuse to start. The dishwasher door latch is essential to the functioning of your dishwasher.